MonoDAQ-E-AO – low-latency analog output

490,00 excl. VAT

EtherCAT device with analog output:

  • High precision (0.1% +-1 mV)
  • Excellent dynamic performance (92dB SNR, -90 dB THD)
  • Low latency: under 100 us EtherCAT-to-analog delay (from real-time EtherCAT master)

Download datasheettechnical-drawing


What's in the box

  • 1x MonoDAQ-E-AO
  • 1x Passive PoE power injector
  • 1x USB-to-12 V power supply

Category:

Description

Low-latency, high precision analog ouptut with excellent dynamic performance (92dB SNR, -90 dB THD). Under 100 microseconds of EtherCAT-to-analog delay possible.

Analog output specification
DAC Resolution: 18bit
Sampling Rate: 1000 S/sec
Number of channels: 1
Full Scale Output Range: ±10 V
Analog output bandwidth: 50 kHz
Accuracy: 0.1% ±1mV (0 to 20 mA load)
Temperature gain drift: ±10 ppm/K
Temperature offset drift: ±5 uV/K
SNR @1000 S/s output rate: 92 dB (sine wave, 250 Hz, ±9 V)
THD: -90 dB
Output impedance: 0.45 Ohm DC
Maximum output current: 20 mA
Settling time (0.05% of set value): 30 us @ 1000 Ohm load, -10 V to 10 V step
Max slew rate: 2.5 V/us @ 1000 Ohm load
Max capacitive load (2% overshoot): 10 nF
Maximum load: 500 Ohm
Output connector: BNC

General specification
Data interface EtherCAT, 100 Mbit/s
Data interface connectors: RJ45 (1 cable for data, power and sync, daisy chainable)
Power supply: 12 V to 50 V
Power consumption: 2 W typ.
Environmental rating: IP20
Temperature range: -20 degC to 60 degC
Weight: 130 g
Dimensions: 70x62x28 mm

Download datasheet

Download technical drawing

1 review for MonoDAQ-E-AO – low-latency analog output

  1. Post
    Author
    5 out of 5

    We use the device with TwinCAT EtherCAT master and it performs extremely well to drive valves in a distributed piping system.

Add a Review